Contact CP&A by email, phone, or fax

Directions

How to get to our Tacoma office:

 

from Olympia:

Take I-5 North to Tacoma.  Stay right to exit onto Highway 16 (west) towards Gig Harbor.  Stay left once you are on exit ramp.  You will pass under I-5, and then immediately merge left onto Highway 16 (westbound).  Follow directions for Highway 16 @ 1-5, below.

 

from SeaTac/Seattle:

Take I-5 South to Tacoma.  Just past the Tacoma Dome, stay right and exit onto Highway 16 (westbound) towards Gig Harbor.  Follow directions for Highway 16 @ 1-5, below.

 

from Highway 16 @ I-5:

Go past first exit for 19th Street, keep going under the 19th Street overpass, and take second exit to 19th Street West.  At end of exit ramp, turn right, then a short distance later turn right again onto 19th Street West and over Highway 16.  Follow 19th Street West, past Pearl then past Mildred.  Go past Mildred, and turn left into retail center just before you get to Washington Mutual Bank.  As you turn in to the parking lot, our office is straight ahead, the last one on the right, with our logo on the awning.

 

from Gig Harbor:

Take Highway 16 (east) over the Tacoma Narrows Bridge towards Tacoma.  Stay in right lane across the bridge.  Immediately after you get off the bridge, take the right exit for Bridgeport Way/James Street.  At top of exit ramp, turn right (south) onto Bridgeport Way.  At second stoplight, turn left (east) onto 19th Street West.  Look for Washington Mutual Bank on your right, and just past the bank turn right into the retail center parking lot.  Our office is straight ahead, the last one on the right, with our logo on the awning.

Corporate Office:

6830 19th Street West, Tacoma, Washington 98466, USA

Phone: (253)627-7400, Fax: (253)627-4715, Email: casperph@cranedesign.com

Home | JOB OPPORTUNITY | HISTORY | MISSION | CRANE SERVICES | STRUCTURAL DESIGN | SEISMIC DESIGN | OTHER SERVICES | SOFTWARE | CLIENT LIST | STAFF | EXAMPLE PROJECTS | PUBLICATIONS*